Table of Contents
Advertisement
2.2
Device Setup
To view data, users need to power on and sync the device.
1. Power on the device:
•
•
The User LED flashes white 3 times to indicate the device is powering up. If the User
LED flashes red 3 times, the device is already ON. Refer to
The device stays awake for 20 seconds after power-on or waking up.
Note:
2. To sync the device, press the User Button within 20 seconds of turning on or
waking up the device. It can take up to 60 minutes for data to arrive. The User
LED flashes green once data is successfully sent to M2X.
2.3
View Device Data
Users can view device data in two ways:
1. Download the Intel® LTE IoT Display App
•
•
Google Play (Android versions 6-7 are supported).
2.
. Use the
Figure 5. View Device Data
The top portion of the screens offers a flexible search form with several fields to enter
search criteria. This section allows users to search using their own criteria or using the
drop-down menu options. Refer to
Sonim* XPi
User Guide
12
Press and release the Power Button
OR
Connect the device to a power supply (5V) via the Micro USB connector
iTunes (iOS versions 9-11 are supported)
AT&T* M2X
website.
Device Search
Capability.
Document Number: 336569 Rev 1.0
Quick Setup
Power On the
Device.
December 2017
Advertisement
Table of Contents
