Table of Contents
Advertisement
4.2.2
Device Fields
Figure 15. Device Fields
A.
Device Name: This is the Name assigned to the Device. By default, this is the
Device Serial Number but it can be edited to a more user-friendly name.
B.
Device Serial Number: Serial Number of the device. The Serial Number is
printed on the back of the device.
C.
ICCID: The ICCID associated with the e-sim on the device
D.
Status: Current Status of the device. The possible states are:
E.
Last Data Received: The date of the most recent successful communication
with the device.
F.
Configuration: There are 2 possible values for the Configuration setting:
Sonim* XPi
User Guide
24
Not Activated: The Device has not been activated or device activation
o
failed
Healthy: The Device is communicating with the Intel® DMS
o
Note: A Device Status of Healthy indicates that the Device is Online
and communicating successfully with the Intel® DMS. It is not an
indication that the device is successfully collecting and uploading
sensor data to M2X.
Pending Sync: The most recent configuration change has not been
o
synced to the device
Sync Error: The most recent configuration change was scheduled over
o
4 hours ago and failed to sync to the device
Error Offline: The device is not communicating with the Intel® DMS
o
Offline: The device has not reported to the Intel® DMS for 4 hours since
o
the last data upload. This status also indicates that no configuration
update is pending.
Order Default: Indicates that the device is using the factory default
o
settings.
Custom: Indicates that device configuration has been updated from the
o
factory defaults.
Using the Intel® Device Management Service
Document Number: 336569 Rev 1.0
December 2017
Advertisement
Table of Contents
