Quick Setup
3. Enter the AT&T IoT account credentials that were used when purchasing your
devices.
Figure 3. Enter AT&T IoT Account Credentials
You are routed to Intel® DMS to activate your devices. Refer to the
Intel® Device Management Service
If you do not have a user name and password for the AT&T IoT account, contact the
Note:
person who purchased the devices for your company.
4. Click 'Activate Devices' to activate all of the devices in your order.
Figure 4. Activate Devices button
You are routed to the Devices tab of the Intel® DMS. For details on using Intel® DMS, see
Using the Intel® Device Management
December 2017
Document Number: 336569 Rev 1.0
section for details.
Service.
Using the
Sonim* XPi
User Guide
11