Using the Sonim XPi
3.6.3
User LED
Table 6.
User LED Indicators
Flashing
Flashing
GREEN
for half a second
RED
for half a second
3.7
Button Behavior
Figure 6 illustrates the buttons of the device.
3.7.1
User Button
Before performing any action, press and release the Power Button to ensure the system
is awake.
Table 7.
User Button Behavior
Button is pressed and released
3.7.2
Power Button
Table 8.
Power Button Behavior
Button is pressed and held for 10
seconds
Button is pressed and released
December 2017
Document Number: 336569 Rev 1.0
User LED
WHITE
quickly 3 times
RED
every second
User Button
Power Button
Powering up
Button held while powering down the device
Data is successfully sent to M2X
There is no connection the cloud. To
troubleshoot, see FAQ
Behavior
An immediate connection attempt to the Cloud server is
made, initiating a configuration check and transfer of
sensor data. The transfer only happens if sensor data is
buffered since the last upload.
Note: The User LED is
GREEN
is successfully sent to the cloud.
Note: On pressing the User Button, the User LED is
for 100ms. This LED display indicates that the button
press has been detected.
Behavior
Device powers down.
The User LED flashes
RED
is held.
The device wakes up and does not go back to sleep for
20s.
The User LED flashes
RED
has woken up
Behavior
for half a second when data
WHITE
every second while the Button
3 times to indicate the device
Sonim* XPi
User Guide
17