Triggers; Adding A Trigger; Table 20. Triggers; Table 21. Adding A Trigger - Sonim XPi User Manual

Using the Intel® LTE IoT Display App
6.9

Triggers

Table 20. Triggers

Screen
To view existing or create a
new trigger, tap the
Triggers tab.
Triggers allow you to
receive notifications when a
sensor hits a particular
threshold.
When this happens, the
device trigger status is
known as activated.
Devices with triggers in the
activated state have red
map pins on the Devices
view and sensor details are
shown in red.
6.9.1

Adding a Trigger

Table 21. Adding a Trigger

Screen
Tap Add Trigger to add a
trigger for your device.
You must enter the
following information to
save a new trigger:
• Trigger Name (user
determined)
• One or more Conditions,
with the following values:
 Sensor (
 Ambient light (lux)
 Atmospheric
pressure (mbar)
 Battery (%)
 Humidity (%)
 Peak shock (G)
December 2017
Document Number: 336569 Rev 1.0
iOS view
iOS view
Android view
Android view
Sonim* XPi
User Guide
43