Viewing Device Data; View Device Data In M2X; Figure 21. View Device Data In M2X - Sonim XPi User Manual

5.0

Viewing Device Data

You can access your device data via M2X at https://m2x.att.com.
5.1

View Device Data in M2X

When a device is powered on, it connects to Intel® DMS to download its configuration,
which includes the M2X Credentials. If the device has successfully connected to the
Intel® DMS, it shows a 'Healthy' status.
The Device then takes an initial reading from all enabled sensors and uploads the
readings to M2X. To verify that the sensor data has been successfully uploaded, select
the device from the 'Devices' tab and click 'View Device Data'.

Figure 21. View Device Data in M2X

Clicking 'View Device Data' redirects you to the M2X page for that specific device
(https://m2x.att.com/devices/<device_id>).
Clicking 'View Data in M2X' redirects you to the M2X page listing all your devices.
Data successfully uploaded appears graphed on the page.
Sonim* XPi
User Guide
30
Viewing Device Data
December 2017
Document Number: 336569 Rev 1.0