Table of Contents
Advertisement
No answer
A fax number is dialed, but no connection is made. Wait for the message to clear.
No dial tone
The printer does not have a dial tone. Wait for the message to clear.
No held jobs
Wait for the message to clear.
No jobs to cancel
Wait for the message to clear.
No recognized file types
Either there are no files saved on the USB drive, or the files saved are not supported. Convert files to any of the
following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.
Power Saver
The printer is saving power while it waits for the next print job.
•
Send a job to print.
•
Touch
to warm the printer to normal operating temperature. Afterwards, Ready appears.
Printer locked, enter PIN to unlock
The control panel is locked. Enter the correct PIN to unlock it.
Printing
Wait for the message to clear.
Programming disk DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not turn the printer power off while Programming disk appears on the display.
Programming flash DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not turn the printer power off while Programming flash appears on the display.
Programming System Code DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not turn the printer power off while Programming System Code appears on the display.
Queued for sending
The scanning process of a fax job completed, but the job is not sent yet because another fax job is being sent or
received. Wait for the message to clear.
Reading USB drive DO NOT REMOVE
Wait for the message to clear.
195
Advertisement
Table of Contents
