Setting The Auto Ring Time (Function 61); Setting The Phone Line Type (Function 62) - Ricoh FAX2050L Advanced Instruction Manuals

Setting the Auto Ring Time
(Function 61)
In Auto mode, the machine rings a
number of times to give you the
chance to pick up the handset before
taking the call automatically. You can
alter the number of rings by changing
the Auto Ring Time.
A
Press {Function} {6} and enter the
access code {2} {2} {2} {2}. Press
{6} {1}, and then the {Yes} key.
B
Press i until the following dis-
play appears.
C
Press the {Yes} key.
The factory setting will be dis-
played.
Note
❒ If you wish to keep these set-
tings, go to step E.
D
Press the {No} key, then enter the
new number using the ten key
pad.
E
Press the {Yes} key, and then the
{Function} key.
Setting the Phone Line Type
(Function 62)
❖ Line:
You must match the fax machine to
the type of line you use: a tone line
or a pulse line. Then, you should
connect the line to the machine.
Note
❒ This function is not available in
some areas.
A
Press {Function} {6} and enter the
i
access code {2} {2} {2} {2}. Press
{6} {2}, and then the {Yes} key.
B
i
Press the {Yes} key.
i
Note
❒ TT = Touch Tone
❒ PD = Pulse Dial
C
Press W and V to set your machine
for a tone dial line (
dial line (
i
D
Press the {Yes} key.
PROGRAMMED
play.
E
Press the {Function} key.
Using Key Operator Settings
) or a pulse
TT
).
PD
will flash on the dis-
i
hi
7
hi
73