Saving Energy With The Power Saving Timer - Ricoh FAX2050L Advanced Instruction Manuals

Key Operator Settings
Saving Energy with the Power
Saving Timer
You can set sleep time to let the ma-
chine go to saving energy condition
and set the wake up time when it re-
turns to standby mode the next morn-
ing. During this Power Saver mode, a
fax message received is stored in the
memory and will be printed automat-
ically the next morning after the wake
up timer is activated.
As a typical example, you could pro-
gram the heating element inside the
printer to stay off at night and over
the weekend. (You can program dif-
ferent settings for every day of the
week.)
To use the Power Saving timer, you
must:
• Program the timers for each day of
the week.
7
• Switch the Power Saving timer fea-
ture on.
Setting the Power Saving Time (Function 71)
Note
❒ While the Power Saving timer is
active, all incoming calls are re-
fused if the memory fills up.
-
For Tuesday, set the Power Saving
timer to switch the heater on at 9 a.m.
and off at 6 p.m.
56
A
Press {Function} {6} and enter ac-
cess code {2} {2} {2} {2}. Press
{7} {1}, and then the {Yes} key.
B
Use W and V to scroll through the
days of the week.
Note
❒ Example: Press V twice to go to
Tuesday.
C
Press the {Yes} key
D
To change the ON to OFF, or the
other way round, press the {*} or
{#} keys.
Note
❒ There are two timers for each
day, each with an ON/OFF set-
ting. "ON" means that the heat-
er will switch on at the time
indicated. "OFF" means that the
heater will switch off at the time
indicated.
E
Press V to move the cursor under
the time.
hi
hi