Clearing Misfeeds; Removing Jammed Paper - Ricoh pro c901 Troubleshooting Manual

3. Clearing Misfeeds

This chapter describes what to do if a paper jam (misfeed) occurs.

Removing Jammed Paper

This section describes how to locate and remove jammed paper.
• The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot
surface." Otherwise, an injury might occur.
• Some of this machine's internal components get very hot. For this reason, take care when removing
misfed paper. Not doing so could result in burns.
• Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or
pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.
• Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove
misfed sheets of paper or masters.
• Keep your hands clear of the inside of the ring binder and the space under the ring binder tray.
You can trap your fingers if you do not.
• When clearing misfeeds, do not turn off the operation switch. If you do, your settings will be lost.
• When removing jammed sheets, take care to touch only those areas explicitly indicated in the manual.
• Do not remove the fusing unit. Doing so will result in loss of print quality.
• To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
• Contact your service representative if misfeeds occur frequently.
• Inside the finisher, or inside the front cover, there is a sticker explaining how to remove misfed paper.
• If a detailed removal instruction appears on the right of the screen, follow it.
3
85