Agilent Technologies E8362B Service Manual page 255

PNA Series Microwave Network Analyzers
E8362B, E8363B, E8364B
Replacement Procedure
NOTE When replacing the assemblies, ensure that the ribbon cables are not under
the assemblies.
1. Reverse the order of the removal procedure.
2. Perform the post-repair adjustments, verifications, and performance tests that pertain
to this removal procedure. Refer to
Figure 7-4 Front Panel Subassemblies Removal
Service Guide E8364-90026
Removing and Replacing Front Panel Subassemblies
Table 7-2 on page 7-76.
Repair and Replacement Procedures
7- 13