Enable Preset Count Operation - Panasonic FP7 User Manual

5.2.7 Enable Preset Count Operation

• The enable preset count operation is that the enable and preset functions are allocated to
the control signal.
• Resets the count value to a specified preset value when the counter becomes enabled by
the change in the control signal.
 Positive logic enable operation and preset operation at rising edge
Addition
Counter input
Subtraction
Control signal
(Preset process)
(Enable process)
Count value
Preset value
0
 Negative logic enable operation and preset operation at trailing edge
Addition
Counter input
Subtraction
Control signal
(Preset process)
(Enable process)
Count value
Preset value
0
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com