Panasonic FP7 User Manual page 34

 External output function (Settable for each channel)
item
Signal setting
Output hold
setting
External
output 0
ON timing
delay
ON hold time
Signal setting
Output hold
setting
External
output 1
ON timing
delay
ON hold time
(Note 1): The ON timing delay and ON hold time are enabled only when the band comparison function is used.
 Capture function (Settable for each channel)
item
Capture 0 setting
Capture 1 setting
Sampling capture function
operation setting
Sampling time
(Note 1): When the sampling capture function has been selected in the capture 0 setting, the capture 1 setting is
invalid.
 Interrupt function (Settable for each channel)
item
Interrupt function
enable/disable setting
(Note 1): Use the dip switches on the side of the unit to enable the interrupt function.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Not output/Output
Set the condition of the output when a CPU or high-speed
counter error occurs.
Not hold/Hold
Setting range: 0 to 1,000 ms
Setting range: 0 to 1,000 ms
Not output/Output
Set the condition of the output when a CPU or high-speed
counter error occurs.
Not hold/Hold
Setting range: 0 to 1,000 ms
Setting range: 0 to 1,000 ms
Description
Not use capture 0 function
Capture function at rising edge of control 0 signal
Capture function at trailing edge of control 0 signal
Capture function at rising edge of control 1 signal
Capture function at trailing edge of control 1 signal
Control 0 signal positive logic sampling capture function
Control 0 signal negative logic sampling capture function
Control 1 signal positive logic sampling capture function
Control 1 signal negative logic sampling capture function
Output relay (Y relay) sampling capture function
Not use capture 1 function
Capture function at rising edge of control 0 signal
Capture function at trailing edge of control 0 signal
Capture function at rising edge of control 1 signal
Capture function at trailing edge of control 1 signal
One operation/Continuous operation
1 to 65,535 ms
Description
Comparison match 0 flag
Comparison match 1 flag
Enable/Disable
Enable/Disable
Default
Not output
Not hold
0 ms
0 ms
Not output
Not hold
0 ms
0 ms
Default
Not use
Not use
One operation
1ms
Default
Enable
Enable