Unit Type And Product Number - Panasonic FP7 User Manual

 Forced ON/OFF of external output relays (Y relays) is available.
• External output relays can be forcibly turned on/off by the monitoring function of a
programming tool or ladder program. It is usable for checking wirings when setting up the
system.
 Band comparison function and Target value match comparison function are
provided.
• Two types of comparison functions are selectable for count values.
• In the band comparison function, a maximum of 16 band comparison conditions (max. 16
sets of upper and lower limits) can be specified for each counter. A maximum 16 outputs can
be turned on/off for each comparison condition. It is also possible to turn on an external
output relay when the count value is in the range of the specified condition.
• In the target value match comparison function, a maximum of 16 target value match
comparison conditions can be specified for each counter. A maximum of 16 outputs are set
or reset for each comparison condition in accordance with the count direction when the
count value reaches a target value. It is also possible to turn on external output relays.
 Programmable output ON function
• When using the band comparison function, the ON timing characteristics of external output
relays can be changed.
ON timing delay [1 ms ~ 1000 ms]: Delays the ON timing of output.
ON hold time [1 ms ~ 1000 ms]: Holds the on state of output during a specified time.
The ON timing delay and the ON hold time can be used in combination.
 Input time constant (Noise filter)
• The noise filter function is available which sets the input time constant to reduce noises of
input A, B and Z signals of each counter, and control signal lines.
Input signal name
Input A signal, input B signal
(The same time constant for
the both signals)
Input Z signal
Control signal

1.1.2 Unit Type and Product Number

Name
FP7 High-speed counter unit
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Noise filter type
0.1 μs (2 MHz), 0.2 μs (1 MHz), 0.5 μs (500 kHz), 1.0 μs (250 kHz),
2.0 μs (100 kHz), 10.0 μs (10 kHz)
0.1 μs (2 MHz), 0.2 μs (1 MHz), 0.5 μs (500 kHz), 1.0 μs (250 kHz),
2.0 μs (100 kHz), 10.0 μs (10 kHz)
2 μs, 5μs, 10 μs, 20 μs, 50 μs, 100 μs, 500 μs, 1 ms, 2 ms, 5 ms, 10 ms
Product No.
2-ch type AFP7HSC2T
4-ch type AFP7HSC4T