Panasonic FP7 User Manual page 121

 Output relays
I/O number
CH0 CH1
Y0 Y10
Y1 Y11
Y2 Y12
Y3 Y13
Y4 Y14
Y5 Y15
Y6 Y16
Y7 Y17
Y8 Y18
Y9 Y19
YA Y1A
YB Y1B
YC Y1C
YD Y1D
YE Y1E
YF Y1F
(Note 1): The I/O numbers in the table indicates offset addresses. The I/O numbers actually allocated are the
numbers based on the starting word number allocated to the unit.
Example) When the starting word number for the unit is "10", the operation ready request flag for CH0 is Y100.
(Note 2) How the capture enable request signal works varies according to the functions to be used.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
CH2 CH3
Y20 Y30 Operation ready request Level
Y21 Y31 Count enable request
Y22 Y32 Reset request
Y23 Y33 Preset request
Y24 Y34 Reset enable request
Current value change
Y25 Y35
request
Preset value change
Y26 Y36
request
Capture enable request
Y27 Y37
(Note 2)
Y28 Y38
―
External output 0 forced
Y29 Y39
ON
External output 0 forced
Y2A Y3A
OFF
External output 1 forced
Y2B Y3B
ON
External output 1 forced
Y2C Y3C
OFF
Y2D Y3D Overflow clear
Y2E Y3E Underflow clear
Y2F Y3F Error clear
Effective
Name
condition
Level
ON edge
ON edge
Level
ON edge
ON edge
Level
―
Level
Level
Level
Level
ON edge
ON edge
ON edge
Description
Relay to recalculate the setting
parameter of counter.
Relay to start the counter operation.
Relay to reset count values.
Relay to preset count values.
Relay to enable the reset by the
control signal and input Z signal.
Relay to request for changing the
current value of counter.
Relay to request for changing preset
values.
Capture enable request when using
the capture function or capture
trigger signal when using the
sampling capture function.
―
Relay to forcibly turn on the external
output 0.
Relay to forcibly turn off the external
output 0.
Relay to forcibly turn on the external
output 1.
Relay to forcibly turn off the external
output 1.
Relay to clear the overflow
annunciation flag.
Relay to clear the underflow
annunciation flag.
Relay to clear errors.