List Of Settings - Citizen CL-E321 User Manual

4.1 List of Settings

This section describes the procedures to configure printer settings using the Label-
PrinterUtility.
The following table lists the settings configurable with LabelPrinterUtility.
Home menu Sub menu
Page Setup Print Speed
Print Darkness
Darkness Adjust 00
Print Method
Continuous
Media Length
Vertical Position 0.00 inch
Horizontal Shift
Vertical Image
Auto Side Shift
Media Sensor
Small Media
Adjustment
Small Media
Length
Symbol Set
Default Configurable range
6 IPS CL-E321: 2 to 8 IPS
CL-E331: 2 to 6 IPS
10 00 to 30
-10 to 10
TT TT
DT
4.00 inch CL-E321:
101.6 mm (Datamax)
0.25 to 99.99 inch
6.4 to 2539.7 mm
(Zebra)
0.25 to 100.00 inch
6.4 to 2540.0 mm
CL-E331:
0.25 to 50.00 inch
6.4 to 1,270.0 mm
-1.00 to 1.00 inch
0.0 mm -25.4 to 25.4 mm
0.00 inch -1.00 to 1.00 inch
0.0 mm -25.4 to 25.4 mm
(Datamax) 0.00 to 32.00 inch
0.00 inch 0.0 to 812.8 mm
0.0 mm
(Zebra) -120 to 120 dots
000 dots
0 dots 0 to 15 dots
See Through See Through
Reflect
None
Off On
Off
1.00 inch 0.25 to 1.00 inch
25.4 mm 6.4 to 25.4 mm
PM 50 options
56
— —
Notes
Sets the print speed
Adjusts the print density
Fine adjustment of the density
command
Selects thermal-transfer (ribbon) or
direct-thermal media
Sets the length of continuous media
The lower row shows millimeter
values when using the printer in
mm mode
Adjusts the printing start position
Adjusts the horizontal image posi-
tion
Adjusts the start position for creat-
ing images
Shifts the horizontal print position
by the specified number of dots
for each sheet/label. This is useful
when significant load is placed on
the portion of the thermal head,
such as when printing vertical
borders.
Selects the type of label sensor
type
Setting for small label support
Sets the length for small label
media
Sets the character set