Table of Contents
Advertisement
3.
Set the media so that the media shaft guide is on the right side of the media when
looking at the front of the printer.
4.
Press the media shaft guide onto the media roll so that the center of the media aligns
with the center of the media shaft and then set the media into the printer.
1. Assemble the media shaft and media shaft guide.
2. Insert the media shaft through the core of the media roll and then set the assembly into
the printer.
3. Set the media in the printer and slide the media to the left from the perspective of looking
at the front of the printer. Insert the media shaft guide into the paper at this position.
CAUTION
Too much abutment force by media shaft guide may cause improper feeding of media, which
may negatively impact print quality.
29
—
—
Hide quick links:
Advertisement
Table of Contents
