8. Online Configuration Mode
1.
Press and hold the FEED key for at least 3 seconds while the printer is online and not
receiving data.
The printer is now in online configuration mode.
The buzzer emits 3 short tones and the status LED flashes alternately in green and red.
2.
Press the FEED key to select media sensor mode.
Media sensor mode
Transmissive sensor mode
Reflective sensor mode
Continuous media mode
Thermal-transfer printing
mode
Direct-thermal printing
mode
3.
Press and hold the FEED key for at least 3 seconds.
4.
Release the FEED key once the buzzer emits a long tone.
The selected media sensor mode is set.
To cancel online configuration mode, continue pressing and holding the FEED key for
at least 3 seconds without releasing your finger at step 4.
The buzzer emits 4 short tones, and the printer restarts.
Buzzer
1 short tones
Press the FEED key ↓
2 short tones
Press the FEED key ↓
3 short tones
Press the FEED key ↓
4 short tones
Press the FEED key ↓
5 short tones
Press the FEED key ↓
Returns to the transmissive sensor mode.
81
—
Status LED
Color
Green
Green
Amber
Amber
Red
—
Interval
Flashes
Flashes quickly
Flashes
Flashes quickly
Flashes