Citizen CL-E321 User Manual page 58

Home menu Sub menu
After Print - 1 AutoConfigure
Function Select Tear
Cutter Action
*Only valid for
models with
cutters
Default Configurable range
On On
Off
Off
Tear
Cut On(only valid for
models with cutters)
Backfeed Backfeed
Through
58
— —
Notes
Enables/disables the auto configu-
ration of optional equipment.
On - Enables auto configuration
(when a cutter is installed, mode is
automatically configured regardless
of the Function Select setting)
Off - Disables auto configuration.
Turn this setting Off and select op-
eration with Function Select when
you do not want to use the cutter if
installed.
Selects the operation mode when
AutoConfigure is Off. Each option
has a specified media stop position.
Enables operation of the applicable
device when selected.
Cutter action setting
Prints only when AutoConfigure for
a model with a cutter is On or when
[Backfeed] is selected for the Func-
tion Select setting.
The [Backfeed] option performs a
back-feed after each cut operation.
The [Through] option continues the
print operation at the trailing edge
of each sheet/label from the first
sheet/label to the n-1 sheet/label
when the number of copies is set
to n. A back-feed operation is then
performed at the trailing edge of the
last sheet/label or when printing a
single sheet/label.