Citizen CL-E321 User Manual page 34

A Label width
B Backing paper width
C Left edge position of label 0
D Label gap length
E Label length
F Label pitch
G Backing paper thickness
H Total media thickness
I Notch right edge position
J Notch left edge position
K Notch length
L Black line right edge
position
M Black line left edge
position
N Black line length
Use the transmissive sensor when using media that has both gaps between labels
Ÿ
and black lines.
Use the transmissive sensor when using fanfold media.
Ÿ
If the label pitch is 1 inch or less, configure an accurate label pitch with the [Small
Ÿ
Media Adjustment] setting.
Ÿ Use carbon-based ink with an OD value of at least 1.5 to print black lines.
Ÿ The stop position and cut position may change depending on the width or type of
media that is used.
Adjust these positions using the Paper Position setting.
Minimum value
mm inch
21.50 0.83
25.40 1.00
0
2.54 0.10
6.35 0.25
8.89 0.35
0.06 0.0025
0.06 0.0025
8.3 0.32
0 0
2.54 0.10
15.00 0.59
0 0
3.18 0.125
34
—
Maximum value
mm
118.00
118.00
2.54
2,539.75 (CL-E321)
1,270.00 (CL-E331)
2,539.75 (CL-E321)
1,270.00 (CL-E331)
2,539.75 (CL-E321)
1,270.00 (CL-E331)
0.125
0.19
60.80
57.20
17.80
66.50
51.50
17.80
—
inch
4.65
4.65
0.10
99.99 (CL-E321)
50.00 (CL-E331)
99.99 (CL-E321)
50.00 (CL-E331)
99.99 (CL-E321)
50.00 (CL-E331)
0.0049
0.0075
2.39
2.25
0.70
2.62
2.02
0.70