Table of Contents
Advertisement
Mode
Emulation switching mode
HEX dump mode
Initialization mode
3.
Once the desired operation mode has been selected, press and hold the FEED key for
at least 3 seconds.
4.
Release the FEED key once the buzzer emits a long tone.
The printer is now in the desired operation mode.
5.
After finishing use of operation modes, press and hold the FEED for at least 3 seconds
to return to the normal startup mode.
After you have finished configuring each mode, restart the printer.
To return to the normal startup mode without selecting an operation mode after chang-
ing to the special function mode, press and hold the FEED key for at least 3 seconds.
If you continue to press and hold the FEED key for at least 3 seconds after the buzzer
emits a long tone, the buzzer will emit 4 short tones, and then printer restarts.
The printer restarts, and changes to normal mode.
Buzzer
4 short tones
Press the FEED key ↓
5 short tones
Press the FEED key ↓
6 short tones
Press the FEED key ↓
Returns to the sensor adjustment mode.
71
—
Status LED
Color
Amber
Red
Red
—
Interval
Flashes quickly
Flashes
Flashes quickly
Hide quick links:
Advertisement
Table of Contents
