Monitoring The Print Head Overheating; Self Testing And Internal Settings; Print Area - Citizen CMP-10 User Manual

5.4 Monitoring the Print Head Overheating

If the temperature exceeds 65°C for some reason, the printer
automatically stops printing with Power LED indication of "Error" to
protect the print head.
If the head temperature returns to 60°C or below, the printer is ready for
printing.

5.5 Self Testing and Internal Settings

G Keep the LF switch pressed down.
G Press the ON/OFF switch down.
G Release the ON/OFF switch.
G Release the LF switch.
Immediately after releasing the LF switch the printer will print out a SELF
TEST report.
At the end of the report, density, auto-power off time, head temperature,
battery output voltage, communication mode, baud rate (for serial
communication) are printed.
The number of marks * in the parentheses aside battery output voltage
shows a level of battery charge in 5 steps.

5.6 Print Area

4 mm
Paper width - 58 mm
Print area - 48 mm
Print area
Thermal paper
— 30 —
6 mm