Home menu
Sub menu
Global Configu-
ration
Machine Infor-
Model Number
mation
*2
Serial Number
Boot Version
*2
ROM Version
*2
ROM Date
*2
ROM Check-
Sum
*2
Print Counter
Service Counter
Cut Counter
Sensor Monitor
*2
MAC Address
*2 This cannot be obtained with LabelPrinterUtility. To check the value, print the list of settings.
4.2 Obtaining the LabelPrinterUtility
1.
Access the following URL from a PC to download the LabelPrinterUtility.
http://www.citizen-systems.co.jp/support/download/printer/label/index_en.html
2.
Save the downloaded LabelPrinterUtility.exe to the desired folder.
4.3 Using the LabelPrinterUtility
Start LabelPrinterUtility.exe.
Refer to the user manual for more information on using the application.
Default
-
Config Set 1
-
-
-
-
-
-
-
-
-
-
-
—
Configurable range
Config Set 1
Configuration number setting
Config Set 2
Config Set 3
CL-E321
Displays the model number. *Ap-
pears as "CL-E331" for the
CL-E331 model.
RH********
Displays the serial number
*.*
Displays the boot version
********
Displays the ROM version
**/**/**
Displays the ROM creation date
****
Displays the ROM checksum
****.*** km
Displays the print counter
****.*** km
Displays the service counter
*******
Displays the cut counter only for
models with cutters
*.* V
Displays the sensor level
**.**.**.**.**.**
Displays the MAC address
Refer to 7.3 Configuration Print Mode
62
—
Notes