Data Editor (Copy, Move, Delete) - AOR AR-DV10 Operating Manual

Hide thumbs Also See for AR-DV10:

Table of Contents

An alternative method to select characters and symbols is by rotating the dial knob. This

method gives a wider choice of symbols than the key entry.

ABCDEFGHIJKLMNOPQRSTUVWXYZ[＼]^_`

abcdefghijklmnopqrstuvwxyz{|}~ (blank space)

!"#$%&'()*+,-./0123456789:;<=>?@

10.4. DATA EDITOR (COPY, MOVE, DELETE)

The contents of memory channels, memory banks, scan groups, search banks, and search

groups may be copied, moved, and erased.

Press [MENU].

Use [▶] to select [EDIT], then press [ENT].

Use [▶] to select any of the following categories and then

COPY, MOVE or ERASE the data:

MEM CH:

MEM BANK:

SCAN GRP:

SEARCH BANK: For a search bank.

SEARCH GRP:

Press [ENT] and rotate the dial selector to choose either:

COPY: To copy data

MOVE: To move data (the original will be lost)

DEL:

To delete data

Press [ENT] to access the data input screen.

Using the dial knob, select the data to be erased, or the

data to be copied or moved to a target location, then

move to the next selection with the [▶] key.

Once all the data is entered, initiate the copy/move/erase

procedure by selecting: [XXX EXEC] and then press

[ENT].

◯「WRITING MEMORY...」will be displayed for a short time, until the procedure is

completed.

For just a single memory channel.

For an entire memory bank.

For a scan group.

For a search group

Table of Contents