Table of Contents
Advertisement
START
Press the [ ● ] button to start audio recording.
Once started, the [REC] icon will be displayed on the top left of the LCD.
STOP
Press the [ ● ] button to stop audio recording.
The [REC] icon will blink while the audio data is written to the card. Once the icon turns OFF,
data write is complete.
Note: If the data being written is large, it might take a while to complete. Do not interrupt
this process.
HOW TO SKIP BLANKS
The SQL.SKIP function removes blank spaces in the recording. When SQL.SKIP is set to
ON, the recording is paused when the squelch is closed (the recording file does not increase
in size) and recording is saved only when the squelch is open.
1.
Press [MENU], then use the cursor key [▶] to select [CONF] and press [ENT].
2.
Use the cursor key [▶] to select [SQL.SKIP] and press [ENT].
3.
Select ON or OFF by rotating the DIAL selector knob.
4.
Press [ENT].
6.4.
PLAYBACK
Audio which has been recorded using the AR-DV10 can
be played back directly on the AR-DV10.
1.
Long press on [ ● ], then press [ENT].
◯ The recording files list is displayed.
◯ You can browse through the files list using the [▶] key.
2.
Select the desired recording and press [ENT] to start
the playback. [PLAY] will blink at the top of the screen
during playback.
3.
To stop playback, press the [CLR] button.
6.5.
SD CARD FORMATTING
The receiver cannot format SD cards. Should the SD card need to be formatted, use the
official SD formatting utility available at http://www.sdcard.org/downloads/formatter_4/
26
Advertisement
Table of Contents
