Table of Contents
Advertisement
2.
CONTROLS & CONNECTORS
2.1.
TOP PANEL
(1) Antenna jack (BNC 50 )
Attach the supplied flexible antenna or connect
an external antenna.
(2) Antenna ring
Covers the gap between the antenna and the jack.
Remains on the jack when the antenna is
removed.
(3) VOLUME (inner) knob
Turn this (inner) control clockwise to increase the
volume and counterclockwise to decrease the
volume.
(4) DIAL selector (outer) knob
Tunes the frequency up or down and selects
menu items.
2.2.
FRONT PANEL
(5) LCD (liquid crystal display)
Shows selected operating conditions, as
described in chapter 2.7 "LCD DSPLAY"
(6) Cursor keys and [ENT] key
[ ◀ ] and [ ▶ ] are used to change the
frequency or select an item displayed on
the LCD. Press the [ENT] key to store
the selection or entered values. The
[ENT] key is also used to switch VFOs.
Press and hold the [ENT] key to display
the memory channel registration menu.
(7) [MENU] key
Displays the MENU-TOP screen.
(8) [MODE] key
Displays the receive modes menu.
(9) [ ● ] REC key
Starts/stops audio recording to the SD
card.
(10) [CLR] key
Cancels the current operation or returns
to parent menu.
(11) [
] key lock
Press and hold to enable/disable the lock
feature. When enabled, all controls
except VOL and PWR will be disabled.
(12) Numeric keypad
The keypad is used when setting frequencies, bank & channel numbers, or entry
selections in a menu.
(13) Loudspeaker
6
Advertisement
Table of Contents
