Data Editor Commands - AOR AR2300 Operating Manual

9. Data editor commands

DE
nn
00 Transfer contents of memory bank xx to memory bank yy.
02 Copy contents of memory bank xx to memory bank yy.
04 Transfer contents of search bank xx to search bank yy.
06 Copy contents of search bank xx to search bank yy.
08 Transfer contents of memory channel xxxx to memory channel yyyy.
10 Copy contents of memory channel xxxx to memory channel yyyy.
12 Transfer contents of scan group xx to scan group yy.
14 Copy contents of scan group xx to scan group yy.
16 Transfer contents of search group xx to search group yy.
18 Copy contents of search group xx to search group yy.
21 Delete contents of memory bank xx.
22 Delete contents of search bank xx.
23 Delete contents of memory channel xxxx.
(24) Cancel Pass setting of all channels on memory bank xx.
(Note: Recommend use of MPnn command. Refer to 4-5-3 section of
this manual)
(25) Cancel Pass setting of all channels on search bank xx.
(Note: Recommended use of PDnn%% command. Refer to 4-2-3
section of this manual.)
26 Delete all contents of memory banks.
27 Delete all contents of search banks.
43
DEnn xxxx yyyy
nn: Process number (see below)
xxxx: Channel origin (see below)
yyyy: Channel destination (see below)
Process