Omron NT20S Operation Manual page 238

Terminal Commands
Set Flashing Display
Format
Description
Reference: The Set Flashing Display Command is cancelled by the End Flashing Display
End Flashing Display
Format
Description
Reference: The flashing display attribute is set with the Set Flashing Display Command.
Sets the display attribute to flashing so that all characters and marks sent subse-
quently are displayed flashing. Other attributes remain unchanged.
Command or the Normal Display Command (refer to 6-6 Normal Display and 6-6
End Flashing Display).
The setting with this command remains valid until the screen display is switched or
another display attribute setting is made. The default display attributes are set to a
normal display when a screen is initially displayed.
Use this command with the Set Inverse Display Command (refer to 6-6 Set In-
verse Display) to produce a flashing inverse display.
Clears the flashing display attribute so that all characters and marks sent subse-
quently are not flashing. Other attributes remain unchanged.
The setting with this command remains valid until the screen display is switched or
another display attribute setting is made. The default display attributes are set to a
normal display when a screen is initially displayed.
[ESC] $
1B 24
[ESC] %
1B 25
Section 6-6
219