Installation; Installation Environment - Omron NT20S Operation Manual

Installation

2-2

Installation

2-2-1

Installation Environment

Caution:
Install the NT20S to the operation panel and connect the power to the NT20S as
described below.
Observe the following points when installing the PT in an operation panel.
Do not install the NT20S at sites subject to the following conditions.
Otherwise, the product may malfunction.
S Severe temperature variations
S Temperatures or humidities outside the ranges stated in the specifications
S High humidity, condensation
S Splashing chemical agents
S Severe oil splashing
S Corrosive or flammable gases
S Strong vibrations or shocks
S Direct exposure to wind and rain (outdoor sites)
S Strong ultra-violet irradiation
Take adequate measures to ensure shielding if the NT20S is used at a location
subject to any of the following conditions.
S Static electricity, or noise from other equipment
S Strong electric or magnetic fields
S Nearby power cables
S Potential exposure to radioactivity
Section 2-2
27