Figure 2-3:
A. Terminal compartment
B. Transmitter housing (aluminum or stainless steel) J.
C. Sensor module with signal processing electronics
D. External ground screw
E. Flanged process connection
F. Cone antenna
G. Two cable/conduit entries (½-14 NPT, M20 x 1.5,
or G½)
Optional adapters: eurofast
H. LCD display (optional)
Rosemount 5408 and 5408:SIS Level Transmitters
Components
™
and minifast
I.
Alignment marker (one per side)
Threaded process connection (NPT or BSPP
(G))
K. Air purge ring (option code PC1 for cone an-
tenna)
L.
Integrated air purge connection
M. Parabolic antenna
N. Parabolic antenna with swivel mount
O. Process seal antenna
™
P.
Tri-Clamp process connection
Transmitter Overview
9