Emerson Rosemount 5408 Reference Manual page 170

Specifications and Reference Data
Table A-7: Flanges with Protective Plate Design
Item
Bolting material
(1)
Gasket
Flange material
Hub material
(1) Note that a minimum gasket thickness of 0.125 in. (3.2 mm) is required when using an air purge ring (option code PC1).
Table A-8: Alloy C-276 (UNS N10276) Flanges
Item
Bolting material
Gasket
Flange material
Hub material
Table A-9: Alloy 400 (UNS N04400) Flanges
Item
Bolting material
Gasket
Flange material
Hub material
160
ASME
SA193 B8M Cl.2
Soft (1a) with min. thickness 1.6 mm
or
Spiral wound gasket with nonmetallic filler
(1b)
Stainless steel A182 Gr. F316L/F316 and EN 10222-5-1.4404
SB574 Gr. N10276 (solution annealed condition) or SB164 Gr. N04400 (solution an-
nealed condition)
ASME
UNS N10276
Soft (1a) with min. thickness 1.6 mm
or
Spiral wound gasket with nonmetallic filler
(1b)
SB462 Gr. N10276 (solution annealed condition) or SB575 Gr. N10276 (solution an-
nealed condition)
SB574 Gr. N10276 (solution annealed condition)
ASME
UNS N04400
Soft (1a) with min. thickness 1.6 mm
or
Spiral wound gasket with nonmetallic filler
(1b)
SB/B564 Gr. N04400 (solution annealed condition) or SB/B127 Gr. N04400 (solution an-
nealed condition)
SB164 Gr. N04400 (solution annealed condition)
EN, JIS
EN 1515-1/2, ISO 3506 A4-70
Soft (EN 1514-1) with min. thickness 1.6
mm
or
Spiral wound gasket with nonmetallic filler
(EN 1514-2)
EN, JIS
UNS N10276
Soft (EN 1514-1) with min. thickness 1.6
mm
or
Spiral wound gasket with nonmetallic filler
(EN 1514-2)
EN, JIS
UNS N04400
Soft (EN 1514-1) with min. thickness 1.6
mm
or
Spiral wound gasket with nonmetallic filler
(EN 1514-2)
Reference Manual