Set Job Queue State - DataCard SD260L Installation And Administrator's Manual

Set Job Queue State

Enter or select values prior to shipping the printer or system to or from repair facilities.
This setting is used primarily for financial printers. Contact your service provider
for more information.
Field
Current Password
Next Password
Confirm Next Password
State
1.
Enter the current password for the printer or system.
2.
Enter a new password for the printer or system.
3.
Re-enter the new password for verification.
4.
Select a state:
Online—The printer performs normally.

Suspend—Deactivates the printer, but allows for some exception jobs.

Offline—Deactivates the printer for transportation.

5.
Click Set Job Queue State to apply the changes.
To re-enable an "Offline" printer and set it back to "Online," you must enter the same
password that was used to set it to "Offline."
SD260L/SD360/SD460 Installation and Administrator's Guide
Value Description
Enter the currently set password.
Leave the field blank if no password
was previously set.
Enter a new password. A blank value
means that no password is required or
leaves the current password
unchanged, depending on the
settings.
Retype the Next Password.
Online StartJob succeeds if there is space in
the queue.
StartJob succeeds if there is space in
Suspend
the queue and exceptionJob=true.
StartJob does not succeed under any
Offline
circumstances.
77