Unpack The System - DataCard SD260L Installation And Administrator's Manual

Unpack the System

Remove the printer and laminator from their shipping cartons.
1.
Open the printer shipping carton and remove the printer and its accessories.
2.
Open the laminator shipping carton and remove the accessories boxes.
Power Supplies
and Cords
Laminator
3.
Lift the laminator from the carton and remove the foam end caps.
4.
Place the laminator on a surface that meets the requirements specified in
Requirements"
5.
Secure the laminator, if necessary. Refer to
Save the shipping cartons and packing materials. They are required if you need to
store, move, or return the system for service.
A-4
on page A-2.
Packing Materials
(foam end caps)
"Bolt-Down Option" on
SD460 Laminating System
"SD460 Site
page A-5.