SECTION 9—BATTERIES
6. Disconnect the controller from the batteries at the rear of the wheelchair.
7. Remove the batteries. Removing the Batteries from Wheelchair on page 72.
Rear Shroud
Disconnect Batteries from the controller here
Wheelchair Frame
(Battery Retention Bracket
10-32 x 1/2-inch
Hooks to Wheelchair
Pan Head Screws
Frame Here)
Front Shroud
5/16-18 x 5/8-inch
Socket Head
Screws
Battery Retention Bracket
FIGURE 9.2 Removing the Front Shroud/Battery Retention Bracket and Rear Shroud -
Installing the Front Shroud/Battery Retention Bracket and Rear Shroud
Removing the Batteries from Wheelchair
NOTE: For this procedure, refer to FIGURE 9.3.
1. Slide battery tray with batteries out.
2. Disconnect the battery straps.
3. Unplug front battery from rear battery.
4. Remove the front battery.
5. Slide the rear battery forward and remove it from the tray.
72
TDX® SI/SI-HD
Part No 1160845