Removing The Batteries From The Wheelchair - Invacare TDXSP2 User Manual

Base, tdx sp2 series
Hide thumbs Also See for TDXSP2:
Table of Contents

Advertisement

Invacare strongly recommends battery installation
and replacement be performed by a qualified
technician.
Read the installation instructions noted on the
battery and in the manual.
Ensure there is no battery acid in the bottom or
around the battery box or on the sides of the
battery(ies). Neutralize battery acid with baking soda
if found.
Clean battery tray and batteries prior to installation.
Use battery lifting strap when available.
Keep batteries in an upright position and avoid
tipping.
Use only deep cycle gel cell battery.
Use box wrench when tightening clamps. Do Not
wiggle the battery terminals/posts when tightening.
60101831-A

7.2.12 Removing the Batteries from the Wheelchair

CAUTION!
Risk of Damage
Cleaning or maintenance may cause damage to
carpeting or flooring.
– Place the wheelchair in a well ventilated
area where cleaning or maintenance can be
performed without risk of damage to carpeting
or flooring.
22NF Batteries shown
Controls System
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tdxsp2-mcgTdxsp2-cg

Table of Contents