Aligning The Ssd Motor To The Gearbox - Invacare TDX SI Service Manual

Aligning the SSD Motor to the Gearbox

1. If adjusting an assembled motor/gearbox, loosen the square neck bolt, spacer, washer
and locknut securing the band clamp to the motor/gearbox assembly.
2. Align the motor to the gearbox according to the table below:
LEFT SIDE
Indicator Mark (Gearbox)
3. If adjusting an assembled motor/gearbox, securely tighten the square neck bolt,
spacer, washer and locknut. Torque locknut to 75 in-lbs ± 10%.
Part No 1160845
WHEELCHAIR
TDX SP - 4 POLE
180° Indicator Mark
(Motor)
49
SECTION 5—MOTORS
RIGHT SIDE
Indicator Mark (Gearbox)
0° Indicator Mark
(Motor)
TDX® SI/SI-HD