Usb Support; External Usb Functionality - HP ProLiant XL270d Gen9 Maintenance And Service Manual

◦ For Windows: IML Viewer
◦ For Linux: IML Viewer Application
• From within the iLO web interface
• From within Insight Diagnostics

USB support

Hewlett Packard Enterprise server s support both USB 2.0 ports and USB 3.0 ports. Both types of ports
support installing all types of USB devices (USB 1.0, USB 2.0, and USB 3.0), but may run at lower
speeds in specific situations:
• USB 3.0 capable devices operate at USB 2.0 speeds when installed in a USB 2.0 port.
• When the server is configured for UEFI Boot Mode, Hewlett Packard Enterprise provides legacy USB
support in the pre-boot environment prior to the operating system loading for USB 1.0, USB 2.0, and
USB 3.0 speeds.
• When the server is configured for Legacy BIOS Boot Mode, Hewlett Packard Enterprise provides
legacy USB support in the pre-boot environment prior to the operating system loading for USB 1.0 and
USB 2.0 speeds. While USB 3.0 ports can be used with all devices in Legacy BIOS Boot Mode, they
are not available at USB 3.0 speeds in the pre-boot environment. Standard USB support (USB support
from within the operating system) is provided by the OS through the appropriate USB device drivers.
Support for USB 3.0 varies by operating system.
For maximum compatibility of USB 3.0 devices with all operating systems, Hewlett Packard Enterprise
provides a configuration setting for USB 3.0 Mode. Auto is the default setting. This setting impacts USB
3.0 devices when connected to USB 3.0 ports in the following manner:
• Auto (default)—If configured in Auto Mode, USB 3.0 capable devices operate at USB 2.0 speeds in
the pre-boot environment and during boot. When a USB 3.0 capable OS USB driver loads, USB 3.0
devices transition to USB 3.0 speeds. This mode provides compatibility with operating systems that do
not support USB 3.0 while still allowing USB 3.0 devices to operate at USB 3.0 speeds with state-of-
the art operating systems.
• Enabled—If Enabled, USB 3.0 capable devices operate at USB 3.0 speeds at all times (including the
pre-boot environment) when in UEFI Boot Mode. This mode should not be used with operating
systems that do not support USB 3.0. If operating in Legacy Boot BIOS Mode, the USB 3.0 ports
cannot function in the pre-boot environment and are not bootable.
• Disabled—If configured for Disabled, USB 3.0 capable devices function at USB 2.0 speeds at all
times.
The pre-OS behavior of the USB ports is configurable in the UEFI System Utilities, so that the user can
change the default operation of the USB ports. For more information, see the HPE UEFI System Utilities
User Guide for HPE ProLiant Gen9 Servers on the Hewlett Packard Enterprise website.

External USB functionality

Hewlett Packard Enterprise provides external USB support to enable local connection of USB devices for
server administration, configuration, and diagnostic procedures.
For additional security, external USB functionality can be disabled through USB options in UEFI System
Utilities.
96 USB support