Removing The Gpu Accelerator - HP ProLiant XL270d Gen9 Maintenance And Service Manual

Removing the GPU accelerator

NOTE:
NVIDIA Tesla P4 GPU does not have any power cables.
Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis.
5. Place the server on a sturdy, level surface.
6. Remove the side panel.
7. Remove the GPU:
a. Loosen the captive screw.
b. Using both hands, gently pull the tab and the rear support bracket to slide out the GPU to access
the power cable.
38 Removing the GPU accelerator