Removing The Drive Cage Assembly - HP ProLiant XL270d Gen9 Maintenance And Service Manual

a. Open the latches on the connectors.
b. Disconnect the cable from the connectors.
9. Remove the air baffle.

Removing the drive cage assembly

Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server .
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the air baffle.
8. Disconnect the cables from the drive backplane:
Removing the drive cage assembly 35