HP ProLiant XL270d Gen9 Maintenance And Service Manual page 31

CAUTION:
To avoid damage to the server , always support the bottom of the server when removing it from the
server .
Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Extend the server from the chassis:
a. Release the safety latches.
b. Pull back the handles.
c. Extend the server from the chassis until the server locks are engaged.
5. Remove the server from the chassis:
a. Press on the server release latches.
b. Slide the server out of the chassis.
Removal and replacement procedures 31