HP ProLiant XL270d Gen9 Maintenance And Service Manual page 51

CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
7. Remove the failed GPU.
8. Remove the front support bracket from the failed GPU.
Retain this bracket to install it onto the new GPU.
9. If installed, remove the existing front support bracket from the new GPU.
Retain this bracket to install it onto the failed GPU.
The support bracket shown in the illustration below might vary depending on the GPU model.
10. Install the support bracket onto the new GPU.
Removal and replacement procedures 51