Gpu Accelerator Numbering - HP ProLiant XL270d Gen9 Maintenance And Service Manual

Item LED
IMPORTANT:
The Dynamic Smart Array B140i Controller is only available in UEFI Boot Mode. It cannot be
enabled in Legacy BIOS Boot Mode. If the B140i controller is disabled, drives connected to the
system board Mini-SAS connectors operate in AHCI or Legacy mode. Under this condition:
• The drives cannot be a part of a hardware RAID or a logical drive.
• The Locate, Drive status, and Do not remove LEDs of the affected drives are disabled.
Use BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to enable or disable the
B140i controller (System Configuration
®
SATA Controller Options

GPU accelerator numbering

• Server left GPU accelerator numbering
106 GPU accelerator numbering
Status
Flashing green
Flashing amber/green
Flashing amber
Solid amber
Off
®
BIOS/Platform Configuration (RBSU)
®
Embedded SATA Configuration).
Definition
The drive is rebuilding or performing
a RAID migration, strip size
migration, capacity expansion, or
logical drive extension, or is erasing.
The drive is a member of one or
more logical drives and predicts the
drive will fail.
The drive is not configured and
predicts the drive will fail.
The drive has failed.
The drive is not configured by a
RAID controller.
®
System Options