Re - Erase Recorder; Rf - Recorder Free Space (Bytes); Rn - Set Deployment Name - Teledyne WORKHORSE Operation Manual

May 2015
>rb?
RECORDER TESTS:
PC Card #0...............................NOT DETECTED
PC Card #1...............................DETECTED
Card Detect............................PASS
Communication..........................PASS
DOS Structure..........................PASS
Sector Test (Short)....................PASS
Recorder tests complete.
RE – Erase Recorder
Purpose Erases/initializes recorder memory.
Format RE ErAsE
Description RE ErAsE erases the recorder memory. This command is case sensitive.
Recommended Setting. Use as needed.
Example See below.
>RE ErAsE
[ERASING...]
RF – Recorder Free Space (Bytes)
Purpose Lists the amount of used and free recorder space in bytes.
Format RF
Description RF lists the amount of recorder space used and free in bytes.
Recommended Setting. Use as needed.
Example See below
>RF
RF = 0,10407936 -------- REC SPACE USED (BYTES), FREE (BYTES)
This shows the H-ADCP contains a 10-MB recorder.
RN – Set Deployment Name
Purpose Sets the deployment name used for future deployments.
Format RN AAAAA
Default RN _RDI_
Recommended Setting. Use as needed.
Description RN sets the deployment name to be used for any future deployments. The deployment
name must be exactly five characters in length, and may contain letters, numbers, or the
underscore (i.e. "_") character. If no deployment name is specified, a default of "_ RDI_"
is used. The deployment name is used as part of the DOS file name for data files stored on
the recorder. For example, the file "_RDI_000.000" would contain data for the first de-
ployment named "_RDI_" (the 000 in the filename indicates the first deployment). The
Page 166
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
WorkHorse H-ADCP Operation Manual