Outline Installation Drawings; Table 10: Outline Installation Drawings - Teledyne WORKHORSE Operation Manual

May 2015
Power
DC Input
Transmit
Serial port
Communications
Optional Internal memory
Temperature
Sensors
Compass
Optional Pressure Sensor
1. @ 60° magnetic dip angle, 0.5G total field. Includes built-in field calibration procedure.
Compass uncertainty is for tilts less than 15°.
2. A 50m pressure sensor is standard. 100m and 200m are available if required.

Outline Installation Drawings

The following drawings show the standard H-ADCP Monitor, Sentinel, Mariner, and Mariner Deck Box
dimensions and weights.
Table 10: Outline Installation Drawings
Description
600 kHz H-ADCP
300 kHz H-ADCP
300 kHz Narrow Beam Width H-ADCP (early builds)
300 kHz Narrow Beam Width H-ADCP (one piece housing)
300 kHz Narrow Beam Width H-ADCP (two piece housing)
Outline Installation Drawings are subject to change without notice. Verify you have the latest
version of the drawing by contacting TRDI before building mounts or other hardware.
Page 108
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
H-ADCP 300
20 to 50 VDC external power supply
60W @ 48V (600kHz), 190W @ 48V (300kHz)
H-ADCP 300
Selectable by switch for RS-232 or RS-422.
ASCII or binary output at 1200 to 115,200 baud.
Optional memory card. Two PCMCIA memory card slots are available. The maximum
memory for each slot is 2GB, with the total memory capacity not to exceed 4GB.
H-ADCP 300
Range -5° to 45° C, Precision ±0.4° C, Resolution 0.01°
(1) Type flux gate, Accuracy ±2°, Precision ± 0.50, Resolution 0.01°, Max tilt ± 15°
Short-term uncertainty ±0.1%, Max. drift ±0.25%
(2)
WorkHorse H-ADCP Operation Manual
H-ADCP 600
H-ADCP 600
H-ADCP 600
Drawing #
967-1004
967-1015
967-6043
967-6095
967-6096
H-ADCP-N 300
H-ADCP-N 300
H-ADCP-N 300