Chapter 12: System Setup And Customizing; Customizing The; Reconfiguring The Application And Page Layout - Raymarine C Series Reference Manual

Chapter 12: System setup and customizing

Chapter 12: System setup and customizing
This chapter describes how to setup and customize your C-Series display. Any settings
that you change will be stored by the display and shown each time you power on. You
can, of course change these settings as many times as you wish.
12.1 Customizing the page sets
Each page set provides access to 5 different pages. Each page can display up to four
application windows.You can view multiple windows of the same application. For
example you could have two chart application on one page - one to view a large scale
chart, the other for a detailed view of your immediate surroundings.
If none of these meet your particular requirements you can edit the page sets to display
the application and page layout that suits your particular needs. This process should
also be used if you wish to run an engine monitor application.
In addition, you can rename of any of the page sets to a title that is more meaningful.
A control is also provided to reset the selected page set to the factory default
configuration.

Reconfiguring the application and page layout

To change the configuration of applications and/or page layout or switch off pages:
1. Select the edit page set option:
MENU
PAGE
Press & hold
Or
Setup
Compass Setup...
Display setup...
Databar Setup...
Select Page Set....
System Diagnostics
Remove CF Card...
Highlight Select
Page Set
Enter Select
Page Set
Highlight page set for
editing
177
EDIT PAGE SET....