Raymarine C Series Reference Manual page 75

Chapter 4: Using the Chart
3. Continue entering waypoints. If you make an error, you can remove the last way-
point (see
4. Save your route when it is complete (see
4nm
SHOW/HIDE
ROUTES...
... using existing waypoints
You can use waypoints that already exist, to build a new route.
1. Create your route:
ROUTES
If you make an error, you can remove the last waypoint (see page 62 for details).
Note:
2. Save your route when it is complete (see
Building a route using the waypoint list
You may prefer to build routes using existing waypoints in the waypoint list:
1. Select the Waypoint List route build option:
page 62
for details).
North-Up (Relative Motion)
Sunday Trip#
PORT POINT
Port point
PORTSIDE
FOLLOW ROUTE
OPTIONS...
BUILD NEW
page 63
RTE
Portside
Sunday Trip#
CREEK VIEW
BUILD NEW
ROUTE
ROUTE
page 63
for details).
Sunday Trip#
GULLY RIDGE
CREEK POINT
REVIEW AND EDIT
ROUTES...
Repeat as necessary
USE THIS
WAYPOINT
WPT
Includes waypoint in
route
Move cursor
over required
waypoint.
for details).
61
Local