Erasing A Group; Controlling Waypoint Display; Show/Hide Waypoint Names - Raymarine C Series Reference Manual

Chapter 3: Working with Waypoints

Erasing a group

You can erase any waypoint group from the system except the group containing the
active waypoint.
When a waypoint group is erased, the group name together with all of the waypoints
in that group are erased from the system with the exception of:
• 'My Waypoints' - the waypoints contained within this group are deleted but the
group name remains.
• Waypoints used in routes within your system.
You should therefore ensure that any individual waypoints that you want to keep
(which are not part of a route), are moved before their group is erased.
1. Display the group list (see
2. Select and erase the group:
Waypoint groups can also be erased via the ARCHIVE AND TRANSFER function
Note:
as described on page 37. For details of how to erase waypoint groups from a card, see
page 21.

3.9 Controlling waypoint display

When you have placed many waypoints on your system, it may become difficult to
easily interpret chart or radar information. This is particularly the case if you have many
waypoints in a small area. There are a number of ways that you can control the display
of waypoints and waypoint information in chart and radar windows. These are:
• Show or hide waypoints with a particular symbol.
• Show or hide waypoints belonging to a specific group.
• Show or hide all of the waypoint names.
• Show or hide the index of a waypoint within a route - chart only (see

Show/hide waypoint names

You can show or hide all waypoint names if required:
GROUP LIST
My Waypoints
Deep fishing
Shallow fishing
Reef fishing
Highlight page
set for editing
PRESENTATION...
page 38
).
ERASE GROUP...
SHOW/HIDE
WAYPOINTS...
YES
Confirm the pop-up
message
page 87
WAYPOINT NAME
ON
Select status
41
).