Buttons And Soft Keys - Raymarine C Series Reference Manual

Chapter 2: General Operation

Buttons and soft keys

To navigate to the required function you will need to press a series of buttons and/or
soft keys:
Buttons
Access system functions or change what you see on-screen.
Within the text of this document they are written in bold capitals
e.g. WPTS/MOB.
Press and hold to access short cuts.
Soft keys
They change depending on
application or function
being performed.
Press the corresponding key
(below the screen) to select.
Further soft keys may be
displayed.
If a key has several options,
each press will highlight the
next option.
If a key displays a single
value or a slider above, use
the rotary control to adjust.
Within the text of this
document they are written
in capitals e.g. SORT LIST.
This process of pressing buttons and soft keys to navigate to the required function is
simplified in this manual and represented by a strip e.g.
WPTS
MOB
Note: The key beep that you hear whenever a button or soft key is pressed, can be
switched off and the soft keys automatically hidden if required. For more details,
please refer to the Display Setup Menu on page 191.
WAYPOINT AT
CURSOR
ERASE WAYPOINT
Example:
The example above shows the series of button and soft key presses
required to change the waypoint default symbol or group.
REVIEW AND EDIT
WAYPOINTS ...
ACTIVE
WAYPOINT AT WAYPOINT AT GO TO WAYPOINT
VESSEL LAT/LONG...
SET DEFAULT SYM WAYPOINT
SORT LIST
& GROUP... GROUPS...
SET UP DEFAULT
SYMB GROUP
SET DEFAULT SYM
& GROUP...
7
PAGE
WPTS
MOB
DATA
MENU
REVIEW AND EDIT
OPTIONS... WAYPOINTS
VIEW AND EDIT
DETAILS...
EDIT DEFAULT
SET UP DEFAULT
SYMB GROUP