Creating A Route From A Track - Raymarine C Series Reference Manual

80

Creating a route from a track

Creating a route from a track enables you to retrace the course of that track.
When a track is converted the system creates the closest route through the recorded
track, using the minimum number of waypoints. Each waypoint created will be saved
with the depth and temperature data (if applicable) for that position.
CAUTION:
Before following the route, ensure that it is safe for navigation, noting that it
may deviate from your actual path travelled.
... from the current track
You can create a route from the track that you are currently laying. This method will
take a 'snapshot' of the track to date, convert it to a route and then continue laying the
track:
1. Select the track list:
2. Create a route from current track:
Alternatively you can also select the current track with the cursor and convert it
Note:
to a route.
TRACKS...
FROM TRACK...
CREATE ROUTE
FROM TRACK...
C-Series Display Reference Manual
On completion, the maximum deviation of
the route from the recorded track is
displayed and the new route is added to
the route list. It can now be displayed,
edited and erased etc. in the same way as
other routes in the system.
If a track break occurs, only the last
Note:
segment is converted to a route.
CREATE ROUTE
Route generation completed.
Maximum deviation from
oritinal track equals 0,001nm.
Please check route before
navigating. Do you want to name
the route?
Route generated and
dialog box displayed
Track List
Color Name
---- Track 1
---- Track 2
---- Track 3
---- Track 4
YES
Or
NO
To accept default
(numbered)