Raymarine C Series Reference Manual page 17

Chapter 1: Overview
Data (Chapter 7)
Course Deviation Indicator (Chapter 8)
3nm North-Up
You will need accurate heading and position data for your CDI application to be fully
functional.
Engine Monitor (Chapter 9)
T
Navtex (Chapter 10)
Major areas of NAVTEX coverage include the Mediterranean Sea, the North Sea,
coastal areas around Japan and areas around the North American continent.
You will need a Navtex receiver connected to your system via NMEA, in order to receive
this data.
Relative Motion Local
Draft
View data generated by the system or by instruments
available on NMEA 0183, NMEA 2000 and SeaTalk or
2 .
SeaTalk
View real-time display of your vessel on a 'rolling
road' in 3D perspective.
Give details of any correction required to steer your
vessel along a given course.
View data about the distance and time to go until
you reach a specified point.
View engine data e.g. engine temperature, oil pressure,
fuel level etc from up to three engines on a compatible
engine system.
Automatic broadcast of localised Maritime Safety
Information (MSI)
Receive navigational and meteorological warnings, and
search and rescue information.
3